1 files changed, 225 insertions, 0 deletions
diff --git a/src/config.h b/src/config.h
new file mode 100644
index 0000000..16f7f3b
--- /dev/null
+++ b/src/config.h
@@ -0,0 +1,225 @@
+/* See LICENSE for more information on use */
+
+/*
+ * ——————————————< Appearance >—————————————— *
+ *
+ *	   In this section you can configure the
+ *	   settings for sxwm. You can ignore the
+ *	   #define as it is C specific syntax
+ *
+ *	   GAPS (px):
+ *	   How many pixels between windows and
+ *	   screen edges (including bar)
+ *	   BORDER_WIDTH (px):
+ *	   How thick your border is
+ *
+ *	   BORDER_FOC_COL (hex):
+ *	   The colour of your border when the
+ *	   window is focused
+ *
+ *	   BORDER_UFOC_COL (hex):
+ *	   The colour of your border when the
+ *	   window is unfocused
+ *
+ *	   MASTER_WIDTH (float):
+ *	   % of the screen the master window
+ *	   should take as a decimal value 0-1
+ *	   eg. 0.5 is 50%
+ *	   
+ *	   RESIZE_MASTER_AMT (%):
+ *	   % of the master width you want to
+ *	   increment by
+ *
+ *	   MOTION_THROTTLE (int):
+ *	   Usually you should set this to your
+ *	   screen refreshrate. This is set so
+ *	   there is no exessive number of
+ *	   requests being sent to the X server
+ *
+ *	   SNAP_DISTANCE (px):
+ *	   How many pixels away from the screen
+ *	   until the window *snaps* to the edge
+ *
+ *	   NUM_WORKSPACES (int):
+ *	   This is how many workspaces you want in
+ *	   this window manager. Best to leave it
+ *	   default (9).
+ *
+ *	   WORKSPACE_NAMES (char[]):
+ *	   This is just the label that will appear
+ *	   on your status bar. Doesn't have to be
+ *	   a number, it can be anything. Ignore
+ *	   the "\0", this is just a NULL that says
+ *	   to start again, otherwise it would be
+ *	   all of them concatenated together.
+ *
+ * ———————————————————————————————————————————*
+*/
+
+#define GAPS				10
+
+#define BORDER_WIDTH		1
+#define BORDER_FOC_COL		"#005577"
+#define BORDER_UFOC_COL		"#444444"
+
+#define MASTER_WIDTH		0.6
+#define RESIZE_MASTER_AMT	1
+#define MOTION_THROTTLE		60
+#define SNAP_DISTANCE		5
+
+#define NUM_WORKSPACES		9
+#define WORKSPACE_NAMES		\
+	"1"					"\0"\
+	"2"					"\0"\
+	"3"					"\0"\
+	"4"					"\0"\
+	"5"					"\0"\
+	"6"					"\0"\
+	"7"					"\0"\
+	"8"					"\0"\
+	"9"					"\0"\
+
+/*
+ * ————————————< Keys & Bindins >—————————————*
+ *
+ *	   This is where you set your keybinds to
+ *	   execute apps. You can use the CMD macro
+ *	   to make new variables.
+ *
+ *	   How do you make a command to run an app
+ *	   It's simple! Just do this:
+ *
+ *	   CALL(appcallname, "app", "arg2", ...);
+ *
+ *	   What is appcallname? This is just the
+ *	   variable name given to this string of
+ *	   commands given to execvp, the function
+ *	   that executes these programs.
+ *
+ * ———————————————————————————————————————————*
+ *
+*/
+
+CMD(terminal,	"st");
+CMD(browser,	"firefox");
+
+/*
+ * ———————————————< Bindings >————————————————*
+ *
+ *     This is where you assign keybinds to
+ *     perform some actions.
+ *
+ *     How do you bind keys? In sxwm, there is
+ *     three ways to bind keys to perform
+ *     tasks:
+ *
+ *     BIND, CALL or WORKSPACE.
+ *     CALL, calls a function,
+ *     BIND, executes a specified
+ *     program.
+ *     WORKSPACE, sets the bind to move
+ *     and item to said workspace or to
+ *     change to that workspace.
+ *
+ *     USEAGE:
+ *     	 BIND(MODIFIERS, KEY, FUNCTION)
+ *
+ *     	 MODIFIERS:
+ *     	 The mod keys you want held down
+ *     	 for the task to execute. I have
+ *     	 also defined SHIFT as a substitute
+ *     	 for ShiftMask.
+ *
+ *     	 KEY:
+ *     	 The key to press in combination
+ *     	 with the MODIFERS to run the task.
+ *
+ *     	 FUNCTION:
+ *     	 The task to execute. Depending on
+ *     	 whether you're calling CALL or
+ *     	 BIND, this will execute a program
+ *     	 or call a function.
+ *
+ *     	 If you're
+ *     	 calling a function, just put the
+ *     	 name of the funtion.
+ *
+ *     	 Otherwise, put the program you
+ *     	 either defined with the CMD above
+ *     	 or you can skip that step and just
+ *     	 do something like this to create a
+ *     	 "string" in the bindings array:
+ *
+ *     	 { "program", "arg1", NULL }
+ *
+ *     End the line with a comma, as this is
+ *     an array.
+ *
+ * ———————————————————————————————————————————*
+*/
+
+/*< This is your modifier key (ALT/SUPER) >*/
+#define MOD	ALT
+
+#include <X11/keysym.h>
+static const Binding binds[] =
+{
+/*————< MODIFIER(S) >< KEY >—————< FUNCTION >——*/
+
+/*———————< Here are your functions calls >————— — */
+
+	CALL(MOD|SHIFT,		e,			quit),
+	CALL(MOD|SHIFT,		q,			close_focused),
+
+	CALL(MOD, 			j, 			focus_next),
+	CALL(MOD, 			k, 			focus_prev),
+
+	CALL(MOD|SHIFT, 	j, 			move_master_next),
+	CALL(MOD|SHIFT, 	k, 			move_master_prev),
+
+	CALL(MOD, 			l, 			resize_master_add),
+	CALL(MOD,		 	h, 			resize_master_sub),
+
+	CALL(MOD,			equal,		inc_gaps),
+	CALL(MOD,			minus,		dec_gaps),
+
+	CALL(MOD,			space,		toggle_floating),
+	CALL(MOD|SHIFT,		space,		toggle_floating_global),
+
+	CALL(MOD|SHIFT,		f,			toggle_fullscreen),
+
+/*—————< Here are your executable functions >—————*/
+
+	BIND(MOD, 			Return,		terminal),
+	BIND(MOD,			b,			browser),
+
+/*—————< This is for workspaces >—————————————————*/
+
+	CALL(MOD,			1,			change_ws1),
+	CALL(MOD|SHIFT,		1,			moveto_ws1),
+
+	CALL(MOD,			2,			change_ws2),
+	CALL(MOD|SHIFT,		2,			moveto_ws2),
+
+	CALL(MOD,			3,			change_ws3),
+	CALL(MOD|SHIFT,		3,			moveto_ws3),
+
+	CALL(MOD,			4,			change_ws4),
+	CALL(MOD|SHIFT,		4,			moveto_ws4),
+
+	CALL(MOD,			5,			change_ws5),
+	CALL(MOD|SHIFT,		5,			moveto_ws5),
+
+	CALL(MOD,			6,			change_ws6),
+	CALL(MOD|SHIFT,		6,			moveto_ws6),
+
+	CALL(MOD,			7,			change_ws7),
+	CALL(MOD|SHIFT,		7,			moveto_ws7),
+
+	CALL(MOD,			8,			change_ws8),
+	CALL(MOD|SHIFT,		8,			moveto_ws8),
+
+	CALL(MOD,			9,			change_ws9),
+	CALL(MOD|SHIFT,		9,			moveto_ws9),
+
+};